Water can continue to run from side mirrors, trims and bodywork gaps even after the car has been dried. WORK STUFF MAGNETO uses microfiber strips with integrated magnets to collect that runoff before it travels down the panel. Each strip measures 27 × 7 cm (10.6 × 2.8 in), and the set includes two pieces.
WatchMAGNETO · WORK STUFF
Why Choose MAGNETO
SMALL TOOL. SPECIFIC JOB.
MAGNETO is designed for a simple task: collecting residual water from areas that continue to drip after washing. The narrow microfiber strips can remain positioned while you finish drying other parts of the vehicle.
2PIECES
Magnetic microfiber strips
At a glance
Quantity2 pieces
Size27 × 7 cm
AttachmentIntegrated magnets
SurfaceFerromagnetic steel
01 / Magnetic attachment
Built-In Magnets
Integrated magnets help hold MAGNETO in position on compatible steel body panels.
02 / Water collection
Catch Residual Drips
Place the microfiber beneath a drip-prone area to collect water that continues to escape from mirrors or exterior gaps.
03 / Two-piece set
Two Strips. Multiple Positions.
The set includes two 27 × 7 cm strips, allowing you to cover both side mirrors or other suitable areas.
Under the side mirrorMicrofiber stripSet of 2 · 27 × 7 cmOn the body panel
Product Know-How
Where and How to Position MAGNETO
Use MAGNETO on a clean vehicle after washing and rinsing. Identify areas where water continues to escape, then position the microfiber beneath the drip path. Magnetic attachment works only on suitable steel surfaces.
How to Use
Rinse. Place. Check.
01Wash and rinse. Wash and thoroughly rinse the vehicle. Make sure the area where MAGNETO will sit is free from dirt or grit.
02Position the strips. Place MAGNETO beneath the side mirrors or another drip-prone area. Check that the magnets hold securely on the selected steel panel.
03Continue drying. Leave MAGNETO in position to collect runoff while you dry the larger panels with a dedicated drying towel.
04Remove and check. Remove the strips carefully, check for remaining water and reposition them if needed.
Care & Handling
Handle With Care
+Keep it clean. Use MAGNETO only on clean surfaces and keep the microfiber free from trapped dirt.
+Handle carefully. Lift the strips away rather than dragging them across the paint. Do not rely on magnetic attachment to non-magnetic panels.
+Clean and store. Follow the manufacturer's care instructions. Clean and dry the strips before storage.
Use only if the strip rests securely beneath the drip point
MAGNETO uses integrated magnets to attach to ferromagnetic steel panels. The magnets do not attach directly to aluminum, plastic, glass or carbon fiber. If the area below a mirror is not magnetic, use the strip only when it can rest securely beneath the drip point.
MAGNETO FAQ
Quick Answers
What is a magnetic microfiber towel used for?
MAGNETO is designed to collect residual water dripping from mirrors, trims and exterior gaps after washing. It is a supplement to a full-size drying towel.
Do MAGNETO towels stick to every car?
No. Their magnets attach to compatible ferromagnetic steel surfaces. They do not attach directly to aluminum, plastic or other non-magnetic materials.
Can I place MAGNETO on a plastic mirror housing?
The magnets will not attach to plastic. MAGNETO may be positioned beneath the mirror if it can rest securely without sliding or falling.
Can MAGNETO replace a regular drying towel?
No. MAGNETO is intended to collect localized runoff. Use a regular microfiber drying towel for larger panels.
How many pieces are included?
Two magnetic microfiber strips, each measuring 27 × 7 cm (10.6 × 2.8 in).
Will MAGNETO completely prevent water spots?
No product can guarantee that. MAGNETO helps collect water from specific drip-prone areas, but thorough washing, rinsing and drying remain important.
Can the magnets scratch the paint?
Contact with trapped dirt can mark paint, regardless of the accessory used. Make sure the surface and microfiber are clean, place the strips carefully and lift them away instead of dragging them.
Intended UseCollecting residual water drips from exterior bodywork
CareFollow the manufacturer's instructions; keep microfiber clean and dry
Magnetic attachment requires a suitable ferromagnetic surface. Check the panel material and make sure the product can be positioned securely before use.
WORK STUFF ROLL Microfiber01 / Wipe · A roll of 50 reusable 30 × 30 cm microfiber towels for everyday detailing tasks.
→
Good Stuff Microfiber Wash03 / Maintain · For cleaning microfiber accessories according to their care instructions.
→
